Vocal Condenser Microphone
MK-207

It's worth looking at the basic differences of the models:
Condenser microphones are more sensitive and transmit sound cleaner, bringing the sound quality closer to the studio.
MD-305, not so sensitive, but more resistant to ambient noise, and thanks to the frequency response optimized for vocals, it does not require equalization.
The frequency response of the MK-207 is uniform, which allows you to expand the scope of its application as a universal, instrumental microphone, but in order to turn around "to the full" it will need additional equalization.

Yes, thanks to the uniform frequency response, the MK-207 Oktava is suitable for recording almost any musical instruments.

Audio interface or mixing console with XLR-3 connector.
The presence of 48 V phantom power is not required.

The warranty period for the microphone is two years.
In the event of a breakdown, your microphone will be put in order on the factory equipment by specialists who participated in its assembly.

The average service life of the microphone is at least ten years.
Probably, after this period, your microphone will need to replace the foam inserts.

Oktava microphones are created in the center of the artisan capital of Russia - in Tula.
The full production cycle from development to assembly takes place at the Oktava plant.

Yes. Write to us in the chat specifying the contact email, address and name of the studio.

Point the speakers away from the microphone.
The microphone should be kept at a uniformly close distance to the sound source,
in this case the sound engineer will not have to increase the gain to maintain the signal level.

1. Turn off the phantom power.
2. Connect the microphone to the mixing console or audio interface with an XLR-3 microphone cable
3. Turn on the phantom power.
It is not recommended to connect and disconnect the microphone when it is turned on.